SEALANT FOR HEATER LINE
Pottdicht F 500 is a sealant for Heating, under-floor heating, solar plants, photo VOL days plants. Made in Germany. The oldest product of its kind Market leader product Simple operation at the heating. 1 kg into 200 litres water fill. In the heater lines 6 hours to run leave. No more like 60 Grad/C The liquid seals the hole. Filters remove and later again insert. a outstanding product. They save much money with Pottdicht F 500.
reliably leakages in water
circulations š off works automatically also in
inaccessible places š with corrosion protection š simple application seals š saves expensive repair costs Application:
Heating elements and circulation pumps before addition of Pottdicht air out and heating of
body valves fully open. 1 kg of Pottdicht undiluted on 200 litres water into the heating
system, pipings or other systems fill. The rotating water may not contain additives (e.g.
antifreeze). The water temperature should not exceed 60 °C. The water pressure should be
decreased on 1 bar. During the sealing procedure circulation pumps in enterprise hold. The
sealing takes place automatically within fewer hours. Empty, with water fill and air out
plant after sealing procedure. Gas hot springs and filters must be gone around. A heater
interruption is not necessary. Packing data consider. Supply world-wide. by pre-payment. Supply pays the orderer outside of the
European Union states Ecology:
Environmental information š
free from polluting materials š
does not contain Tenside /no Tensides š
without solvents /no leach š
environmentalneutral packing (PE) can without loss be recycelt, deposited or burned.
Durability: At least 2 years. Consumption:
1 kg of Pottdicht F 500 to 200 litres water. Packings: Bottles 1000g, can 5 kg EC Safety Data Sheet in accordance with 91/155/EEC Date of printing: 12 June 2007
Revised: 12 June 2007
Pottdicht F 40 Art. No. 879 Page 1 of 3 1 Trade
and Company Name
Supplier:
Schmelzeisen
Fichtenstrasse 32
D-65527 Niedernhausen Germany
Telephone: (0049)
6127-285-1
Telefax: (0049) 6127-91001
Out of office hours
Telephone: (0049)
173-527 6454
Further information:
Product Development
Tel. (0049) 6127-285-1
Emergency Telephone:
Emergency Call
Center for Intoxication Berlin
Tel. (0049) 30 / 19240 2 Composition
/ Information on Ingredients
Dangerous Components:
CAS-No. Name
Share in % Symbol
R-Phrases
1344-09-8
sodium silicate
<
40
Xi
37/38-41 3 Hazards
Identification
The classification is made in compliance with the valid EC-lists and completed with
information from
technical literature and the company. 4 First
Aid Measures In case of
inhalation: Provide fresh air. In case of contact
with skin: Remove product from
skin, rinse with water and soap In case of contact
with open eye: Immediately rinse with
plenty of water and consult an ophthalmologist. In case of
swallowing:
Consult a
doctor. 5 Fire-Fighting
Measures
Suitable extinguishing media: According
to environmental fire. Product is not inflammable. Not to use: None. Special dangers by product, products of combustion or
gases: None. 6 Accidental
Release Measures Procedures for
absorption: Absorb in liquid-binding
material (e. g. sand, kieselguhr, universal
binding agent). Dispose of contaminated material in compliance with point 13. 7 Handling
and Storage
Handling:
No special measures required. Storage: Do not
store with acids. 8 Exposure
Control and Personal Protection General protection and hygiene measures: 9 Physical
and Chemical Data
Form:
liquid
Colour.
colorless
Odour:
neutral
Value
Unit
Method
Melting Point
not determined
°C
Boiling Point
not determined
°C
Flash Point
not applicable
°C
Danger of Explosion
not explosive
Density
at 20 °C
ca. 1.35
g/cm3
Solubility in/Miscibility with Water
at 20 °C
unlimited
g/l
pH-Value
at 20 °C
11 10 Stability and
Reactivity
Thermal Decomposition: None, if handled
properly. Hazardous Reactions:
None, if
handled properly. Hazardous
Decomposition Products: none. 11 Toxicological
Information
Sensitization:
None.
Additional toxicological information: According to our
experience and information the product does not cause any injuries to health if handled properly. 12 Ecological Information Slightly hazardous for
water. (self-classification) Do not allow undiluted
product or large quantities of it to reach ground water, water bodies or sewage system. 13 Disposal
Consideration
Product:
Must not be added to household waste. Must not be evacuated in an undiluted and/or unneutralized
state into the sewage. Recommendation: Dispose of
under compliance with local public authority regulations. Uncleaned Packaging: Dispose of
under compliance with local public authority regulations.
Recommendation: Contaminated packaging has
to be emptied completely and may be recycled after thorough cleaning. 14 Transport
Information
Not subject to transport regulations. 15 Regulatory
Information
Labelling in accordance with EU Regulations
/ GefStoffV:
Symbol and classification: C Corrosive
R-Phrases:
36/37/38.
Irritates the eyes, the respiratory system and
the skin.
S-Phrases:
2
Store inaccessible for children.
National Regulations:
Water Hazard Class: 1
(self-classification) – low hazard
16 Other
Information construed as
guaranteeing specific properties of the products describes and it does not found
a legal position.
Drawn up by Schmelzeisen, Department of Product Development
Contact:
Mr. Siemon |
